AVAILABILITY |
ISOTOTAL is standardized to 100 000 EBU; the addition of 1 ml of ISOTOTAL to 1 Hl of beer will add 1 EBU. |
DILUTION |
ISOTOTAL can be used directly or can be diluted (for example 10 times). Soft or deionized water is needed. (Hard water may cause cloudiness). The pH of the soft water is adjusted with potassium hydroxide to reach a pH of 8-8.5 after dilution. The 1:9 dilution is prepared by slowly adding the volume of ISOTOTAL to the stirred soft water (final pH‑=‑8.5 with potassium hydroxide). |
ADDITION |
The recommended addition point is at any point between the end of fermentation and the final filtration. The recommended procedure, injection of the aqueous solution into the beer stream, avoids precipitation of the hop acids due to pH shock. A practical place for injection could be the prefilter outlet-line or the final filter inlet-line. The rate of addition by the proportioning pump should be direct proportional to the beer flow in the line. A dip tube in the middle of the beer line provides excellent dispersion. Injections of ISOTOTAL should always be made with a positive pressure pumping system without using CO2 back pressure as it will lower the pH of the injection solution and adversely affect the ISOTOTAL solubility. |
USE RATE |
Use rates will vary depending on the desired bitterness. As the product is used very late in the process there are no significant losses while in traditional hopping the yield from alpha-acids to bitterness units in final beer turns only around 30%. Contact our technical team for calculation of the specific use rate for your application. |
BENEFITS |
- High flexibility in beer bitterness adjusting. - Very high yield close to 100%. - Better foam and enhanced cling. - Improving of hop flavours perception. |
STORAGE |
We recommend storage in full, tightly sealed containers at room temperature 20-25°C. |
FOOD GRADE |
This product complies with FDA recommended specifications for food additives. Certificates of analysis are provided with each delivery. |
| --------------> water rectification of alcohol content | |
| --------------> bitterness adjustment with ISOTOTAL | |
| --------------> coulour adjustment with MALTEX HP 20000 | |
| --------------> flavour adjustment | ---> hop flavour with ISOTOTAL ---> white beer flavour with WB-MIX ---> others |